Biogents – Science for Your Protection –

BG-CO2 timer – to reduce CO2 consumption

The BG-CO2 timer allows you to control when CO2 is released by establishing specific start and stop times. It enables you to set up two start and end times to release CO2 each day.

  • control the release of CO2 to coincide with times of mosquito activity
  • reduce the CO2 consumption up to 75 %
  • extend the longevity of your CO2 bottle and decrease your costs
  • it can be used with all existing traps and runs off of a 9V battery.

Below, the controlled release of CO2 in an example

An example for the controlled release of CO2 with the BG-CO2 timer for Biogents mosquito traps.

Based on the facts above, the following calculation can be made:

Assumption: 10 kg CO2 costing 35 Euros
Savings: ~100 Euros every 3 months when CO2 is used only 6h per day compared to 24h per day

The BG-CO2 timer is placed between the CO2 tank and the mosquito trap.

The BG-CO2 Timer is placed between the CO2 tank and the mosquito trap(s). Up to 5 traps can be connected to a single timer.

Contents

The BG-CO2 Timer for Biogents mosquito traps consists of a body with a display and buttons to set up the release times, two connections to the CO2 tubes.

The BG-CO2 timer consists of a body with a display and buttons to set up the release times, and two connections to the CO2 tubes. The 9 V battery to run the timer is not included in the contents. The battery should last at least 6 months.

Pricing

Prices can be found in the product catalogues.

Ordering

If you are located in the EU or the US, you can order the traps fast and conveniently through the webshop: Biogents webshop for mosquito traps

If you are located outside the EU or the US, please order through e-mail or fax:
e-mail: sales@biogents.com
fax: +49 941 569 921 68

You can also consult our distributors.